Do you have to dial a special prefix, such as “9”, to get an outside line ?
Press “Register” after you have configured the registration number for your location.
Please limit your comments to 500 characters.
The registration center does not seem to be functioning correctly. Please call our voice number, (800) 736-4821 or (415) 390-8300, to register.
Could not open the required serial driver. Unknown error.
Cannot register because another application or task has opened the required serial driver.
Could not find the required serial driver. Unknown error.
Press Cancel to dismiss this window.
Stop
Retry
0123456789 #*@!,()-./
Enter the International Access Code and US Country code you use when making an international call:
Connecting with the registration center…
ATX1D
Enter the long distance code you use when making a toll-free call (“1” is the most common code):
(415) 390-8399
Press the Retry button to try again. Press the Cancel button if you wish to register the next time you restart the Macintosh. Press the Previous button to adjust your settings.
Registration completed.
If you need to register again in the future, to change your address or other information, use the Register button in the PowerPort control panel.
Transferring registration information…
Checking into the Registration center…
Dialing:
Preparing the Modem…
Your registration information was not successfully received. Please try again.
The connection has been dropped.
Try again.
The Modem is not responding.
Check your cable connections and try again.
The Registration center was busy. Please try again.
No dial tone was detected. Check your cable connections and try again.
The Registration center did not answer. Please try again.